View 74VHC245MTC_793932.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

74VHC245 Octal Bidirectional Transceiver with 3-STATE Outputs
November 1992 Revised April 2005
74VHC245 Octal Bidirectional Transceiver with 3-STATE Outputs
General Description
The VHC245 is an advanced high speed CMOS octal bus transceiver fabricated with silicon gate CMOS technology. It achieves high speed operation similar to equivalent Bipolar Schottky TTL while maintaining the CMOS low power dissipation. The VHC245 is intended for bidirectional asynchronous communication between data busses. The direction of data transmission is determined by the level of the T/R input. The enable input can be used to disable the device so that the busses are effectively isolated. All inputs are equipped with protection circuits against static discharge.
Features
s High Speed: tPD
4.0 ns (typ) at VCC VNIL
5V
s High Noise Immunity: VNIH s Low Noise: VOLP
28% VCC (Min)
s Power Down Protection is provided on all inputs
0.9V (typ) 25qC
s Low Power Dissipation:
ICC
4 PA (Max) @ TA
s Pin and Function Compatible with 74HC245
Ordering Code:
Order Number 74VHC245M 74VHC245SJ 74VHC245MTC 74VHC245N Package Number M20B M20D MTC20 N20A Package Description 20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide Pb-Free 20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide 20-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide
Surface mount packages are also available on Tape and Reel. Specify by appending the suffix letter "X" to the ordering code. Pb-Free package per JEDEC J-STD-020B.
Logic Symbol
IEEE/IEC
Connection Diagram
Pin Description
Pin Names OE T/R A0-A7 B0-B7 Output Enable Input Transmit/Receive Input Side A Inputs or 3-STATE Outputs Side B Inputs or 3-STATE Outputs Description
Truth Table
Inputs OE L L H T/R L H X Bus B Data to Bus A Bus A Data to Bus B HIGH-Z State Outputs
H HIGH Voltage Level L LOW Voltage Level X Immaterial Any unused bus terminals during HIGH-Z State must be held HIGH or LOW.
(c) 2005 Fairchild Semiconductor Corporation
DS011520
www.fairchildsemi.com
74VHC245
Absolute Maximum Ratings(Note 1)
Supply Voltage (VCC) DC Input Voltage (VIN) (T/R, OE) DC Output Voltage (VOUT) Input Diode Current (IIK) (T/R, OE) Output Diode Current (IOK) DC Output Current (IOUT ) DC VCC/GND Current (ICC) Storage Temperature (TSTG) Lead Temperature (TL) (Soldering, 10 seconds) 260qC
0.5V to 7.0V 0.5V to 7.0V 0.5V to VCC 0.5V 20 mA r20 mA r25 mA r75 mA 65qC to 150qC
Recommended Operating Conditions (Note 2)
Supply Voltage (VCC) Input Voltage (VIN)(T/R, OE) Output Voltage (VOUT) Operating Temperature (TOPR) Input Rise and Fall Time (tr, tf) VCC VCC 3.3V r 0.3V 5.0V r 0.5V 0 a 100 ns/V 0 a 20 ns/V 2.0V to 5.5V 0V to 5.5V 0V to VCC
40qC to 85qC
Note 1: Absolute Maximum Ratings are values beyond which the device may be damaged or have its useful life impaired. The databook specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. Fairchild does not recommend operation outside databook specifications. Note 2: Unused inputs or I/O pins must be held HIGH or LOW. They may not float.
DC Electrical Characteristics
Symbol VIH VIL VOH Parameter HIGH Level Input Voltage LOW Level Input Voltage HIGH Level Output Voltage VCC (V) 2.0 3.0 5.5 2.0 3.0 5.5 2.0 3.0 4.5 3.0 4.5 VOL LOW Level Output Voltage 2.0 3.0 4.5 3.0 4.5 IOZ 3-STATE Output Off-State Current IIN (T/R, OE) ICC Input Leakage Current Quiescent Supply Current 5.5 4.0 40.0 5.5 0 5.5 1.9 2.9 4.4 2.58 3.94 0.0 0.0 0.0 0.1 0.1 0.1 0.36 0.36 2.0 3.0 4.5 Min 1.50 0.7 VCC 0.50 0.3 VCC 1.9 2.9 4.4 2.48 3.80 0.1 0.1 0.1 0.44 0.44 V VIN IOL IOL VOUT VIN OE VIN VIN 4 mA 8 mA V V VIN IOH IOH VIH IOL or VIL V TA 25qC Typ Max TA
40qC to 85qC
Max
Min 1.50 0.7 VCC
Units V
Conditions
0.50 0.3 VCC
V VIN VIH IOH or VIL
50 PA
4 mA 8 mA
50 PA
VCC or GND VCC or GND VIH or VIL 5.5V or GND VCC or GND
r0.25 r0.1
r2.5 r1.0
PA PA PA
www.fairchildsemi.com
2
74VHC245
Noise Characteristics
Symbol VOLP (Note 3) VOLV (Note 3) VIHD (Note 3) VILD (Note 3) Parameter Quiet Output Maximum Dynamic VOL Quiet Output Minimum Dynamic VOL Minimum HIGH Level Dynamic Input Voltage Maximum LOW Level Dynamic Input Voltage 5.0 1.5 V CL 50 pF 5.0 3.5 V CL 50 pF 5.0 VCC (V) 5.0 TA Typ 0.9 25qC Limits 1.2 Units V V CL CL 50 pF 50 pF Conditions
0.9
1.2
Note 3: Parameter guaranteed by design.
AC Electrical Characteristics
Symbol tPLH tPHL Parameter Propagation Delay Time 5.0 r 0.5 tPZL tPZH 3-STATE Output Enable Time 5.0 r 0.5 tPLZ tPHZ tOSLH tOSHL CIN (T/R, OE) CI/O CPD Output Capacitance Power Dissipation Capacitance
Note 4: Parameter guaranteed by design. tOSLH |tPLH max tPLH min|; t OSHL |tPHL max tPHL min| Note 5: CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: ICC (opr.) CPD * VCC * fIN I CC/8 (per Bit).
VCC (V) 3.3 r 0.3 Min
TA
25qC Typ 5.8 8.3 4.0 5.5 8.5 11.0 5.8 7.3 11.5 7.0 Max 8.4 11.9 5.5 7.5 13.2 16.7 8.5 10.6 15.8 9.7 1.5 1.0 4 8 21 10
TA
40qC to 85qC
Max 10.0 13.5 6.5 8.5 15.5 19.0 10.0 12.0 18.0 11.0 1.5 1.0 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0
Min
Units ns ns ns RL ns ns ns pF pF pF RL
Conditions CL CL CL CL CL 1 k: CL CL CL 1 k: CL CL CL CL 15 pF 50 pF 15 pF 50 pF 15 pF 50 pF 15 pF 50 pF 50 pF 50 pF 50 pF 50 pF
3.3 r 0.3
3-STATE Output Disable Time Output to Output Skew Input Capacitance
3.3 r 0.3 5.0 r 0.5 3.3 r 0.3 5.0 r 0.5
(Note 4) VCC VCC
Open 5.0V
(Note 5)
3
www.fairchildsemi.com
74VHC245
Physical Dimensions inches (millimeters) unless otherwise noted
20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide Package Number M20B
www.fairchildsemi.com
4
74VHC245
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
Pb-Free 20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package Number M20D
5
www.fairchildsemi.com
74VHC245
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Package Number MTC20
www.fairchildsemi.com
6
74VHC245 Octal Bidirectional Transceiver with 3-STATE Outputs
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
20-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Package Number N20A
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 7 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com
www.fairchildsemi.com

▲Up To Search▲

Price & Availability of 74VHC245MTC

	To Download 74VHC245MTC Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .